30232S Fairchild紧凑型精密压力调节器，30232， 30232M，30232NS
30232S Fairchild紧凑型精密压力调节器，30232， 30232M，30232NS
30232S Fairchild紧凑型精密压力调节器，30232， 30232M，30232NS
仙童Fairchild 30型，小型精密调节器30212，30213，30222，30223，30232，30233，30242，30243，30252，30253
Fairchild 30型，小型精密调节器，最大250 psig。供应，30 scfm流量，100 psig供应和20 psig设置
零件号
描述
价钱
30212
1/4“ NPT，0-2 psig可调输出
呼叫
30213
3/8“ NPT，0-2 psig可调输出
呼叫
30222
1/4“ NPT，0-10 psig可调输出
呼叫
30223
3/8“ NPT，0-10 psig可调输出
呼叫
30232
1/4“ NPT，0.5-30 psig可调输出
呼叫
30233
3/8“ NPT，0.5-30 psig可调输出
呼叫
30242
1/4“ NPT，1-60 psig可调输出
呼叫
30243
3/8“ NPT，1-60 psig可调输出
呼叫
30252
1/4“ NPT，2-100 psig可调输出
呼叫
30253
3/8“ NPT，2-100 psig可调输出
Manufacturer: Fairchild Products
Accuracy: 0.15 psi
Ambient Temperature: -40° to 200 °F (-40° to 93.3 °C)
Base Model: 30232
Body Material: Aluminum
Connection Size: 1/4 in. NPT
Elastomer: Nitrile on Dacron
Exhaust Capacity: 2.0 SCFM [3.4m3/Hr] where downstream pressure is 5 psi above 20 psi setpoint
Exhaust Type: Straight (standard)
Flow Capacity: 40 SCFM
Mounting: Wall (21667-1 Bracket Available)
Operator: Knob (standard) 1-7/8 in. O.D.
Options: None
Pipe Size: 1/4 FNPT
Pressure Range: 0 to 30 psig
Product Type: Precision Pressure Regulators
Sensitivity: 1/4 in. W.C.
Supply Pressure: 250 psi
Trim: Brass
Product Category: Regulators
Regulator Type: Compact Precision Pressure Regulator
The Rotork Fairchild Model 30 is a compact precision pressure regulator designed for applications that require high performance and accurate process control where space may be limited or you wish to reduce the overall size of your panel or equipment. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity. The Model 30 pneumatic regulator features control sensitivity of 1/4 in water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions. The Fairchild Model 30 precision regulator will handle a 250 psig [17 BAR] maximum supply pressure and offers five (5) output pressure ranges from 0-2 psig [0-0.15 BAR] (0-15 kPa) up to 2-100 psig [0.1-7 BAR] (15-700 kPa).
Control sensitivity of 1/4 in water column variation allows use in precision applications
Pressure Balanced Supply Valve lets the regulator remain unaffected by supply pressure changes
Flow of up to 40 SCFM [68m3/Hr] with 100 psig supply allows use in applications with high flow requirements
An aspirator tube compensates downstream pressure droop under flow conditions
A separate Control Chamber isolates the diaphragm from the main flow to eliminate hunting and buzzing
Allows servicing with Model 30 Service Kit without removal from the line
Canadian Registration Number (CRN) Certification for all territories and provinces
Hazardous locations: Group II, Category 2, Gas and Dusts: Zones 1, 2 and 21, 22, respectively Gas Groups IIA and IIB
NOTES: Oil free air must be applied to the regulator. Use a filter to remove dirt and entrained liquid in the air line ahead of the regulator. If an air line lubricator is used, it MUST be located downstream of the regulator, to avoid interference with regulator performance.
制造商:Fairchild Products
精度:0.15 psi
环境温度:-40°至200°F(-40°至93.3°C)
基本型号:30232
机身材质:铝
连接尺寸:1/4 in。《不扩散核武器条约》
弹性体:涤纶上的丁腈
排气能力:2.0 SCFM [3.4m3/Hr]，下游压力为5 psi，高于20 psi设定值
排气方式:直排(标准)
流量:40 SCFM
安装:墙壁(21667-1支架可用)
操作人员:旋钮(标准)1-7/8英寸。O.D.
选择:没有
管道尺寸:1/4 FNPT
压力范围:0 ~ 30psig
产品类型:精密压力调节器
灵敏度:1/4 in。后来
供应压力:250psi
修剪:黄铜
产品类别:调节器
调节器类型:紧凑型精密压力调节器
Rotork Fairchild Model 30是一款紧凑型精密压力调节器，专为需要高性能和精确的过程控制的应用而设计，其中空间可能有限，或者您希望减少面板或设备的整体尺寸。在不同的流量条件下，通过使用根据流速调节供应阀的吸气管来保持调节压力的稳定性。30型气动调节阀在水柱中的控制灵敏度为1/4，平衡供应阀提供一致和可靠的精度精度，无论供应压力变化或条件如何，都能保持所需的设定点。Fairchild Model 30精密调节器将处理250 psig [17 BAR]最大供应压力，并提供五(5)输出压力范围从0-2 psig [0-0.15 BAR] (0-15 kPa)到2-100 psig [0.1-7 BAR] (15-700 kPa)。
控制灵敏度1/4的水柱变化允许在精密应用中使用
压力平衡供应阀使调节阀不受供应压力变化的影响
流量高达40 SCFM [68m3/Hr]， 100 psig供应，可用于高流量要求的应用
在流动条件下，吸气管补偿下游压力下降
单独的控制室将隔膜与主流隔离，以消除狩猎和嗡嗡声
允许使用30型维修套件进行维修，而无需从管道上拆卸
所有地区和省份的加拿大注册号(CRN)认证
危险场所:第II组，第2类，气体和粉尘:1、2区和21,22区，分别是气体组IIA和IIB
注意:无油空气必须应用于调节阀。使用过滤器去除调节阀前方空气管路中的污垢和夹带液体。如果使用空气管路润滑器，它必须位于调节器的下游，以避免干扰调节器的性能。